BMW S1000RR 2015 Rear Set Kit

BMW S1000RR 2015 Std/GP Adjustable Rearset Kit Complete W/Pedals Order yours today!

BMW S1000RR 2015 Std/GP Adjustable Rearset Kit Complete W/Pedals  SKU 05-0755B

We are proud to announce our rearsets for the incredible new 2015 S1000RR. This kit features 12 footpeg positions for a custom fit that can be tailored for any condition or rider preference.  Riders can move anywhere from 0 to 25mm up and 0 to 20mm back.  Both our standard and GP shift setup utilize the stock shift BMW rod and quick shifter. The complete rearset kit consists of the rearset plates, footpegs, 3 piece billet pedals, heel guards. This kit assumes that you have OEM rearsets on the bike as some factory hardware may be reused. Our rearsets are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. All spare parts for this assembly can be found under the "Spare Parts" tab. Parts for the brake and shift pedal assemblies can be found under their own designated "Spare Parts" tab. For installation instructions click this link IN05-0755.pdf 05-0755B  BMW S1000RR 2015 Std/GP Adjustable Rearset Kit Complete W/Pedals

New Woodcraft Products for the 2015 season, available through Rising Sun Cycles

Woodcraft has released many New Products for the 2015 season and and all are available through Rising Sun Cycles.

Check out our mini catalog below.

Brammo Empulse  Complete Rearset Kit, Black, RACE ONLY   Honda 600RR 2013-2015  Pro Series SuperBike Armour Bodies bodywork  - 71-0349SB   Kawasaki Ninja 650R  Clip-On Riser Plate  For both street and track  41mm special race only clip-ons    (see website for more info)   Suzuki GSXR 600/750 - 2011-2015  Axle Sliders     Yamaha R1 - 2015  Armour Bodies - Coming Oct. 2015  Axle Sliders  Frame Sliders  Engine Case Covers  Key Switch Elimination Harness  Rearset Kits  Servo Buddy   Yamaha R3  Armour Bodies - Coming Nov. 2015  Frame Sliders  Clip-Ons - Available Sept. 2015  Engine Case Covers  Key Switch Elimination Harness  Rearset Kits   Yamaha FZ07  Frame Sliders  Clip-On Riser Plate  Engine Case Covers  Rearset Kits   Yamaha FZ09  Axle Slider  Frame Sliders  Clip-On Riser Plate  Engine Case Covers  Rearset Kits Key Switch Elimination Harness Eighteen additions this season to our Key Switch Elimination line-up since our introduction in January. If you have not looked at this product line recently, Click here. Available For: Aprilia, Buell, Ducati, Honda, Kawasaki, Suzuki, Triumph and Yamaha Our Key Switch eliminator lets you remove your stock ignition switch. It is "Plug and Play", installs in seconds, requires no modifications to your stock harness and easy re-installation of stock components . US Models Only! Woodcraft Stay Dry Riding Undergarments The BEST under race suit garments we've ever tried! Tops and bottoms available. CLICK HERE for more information Woodcraft Generation III Tire Warmers Our Gen III Dual Temps warmers are made in America and feature all new top grade components throughout the design. CLICK HERE for more information Lever Protection and Hand Guard Our lever guards are designed to keep another rider from accidentally hitting your front brake or clutch lever during close racing. Available in many colors, left or right hand side and complete sets. CLICK HERE for more information

Brake lever Protection and Hand guard Woodcraft

Brake lever Protection and Hand guard The Woodcraft brake lever guard is designed to keep another rider from accidentally hitting your front brake during close racing. The adjustable guard is made from tough plastic and bolted to a CNC-machined aluminum base. The guards are available individually or in sets (left+right).

Just about everyone we talked to knows someone who has crashed due to their brake lever coming into contact with another rider. Our hand guard line not only prevents inadvertent lever contact but also helps to protect your hands during a crash by keeping them out of harms way. We have a few friends whose pinky fingers have been "shortened" in a crash.

MSRP $109.99 - $179.99 Available in sets of left and right or individually in all these colors. To place your order CLICK HERE A video describing these Products

ADJUSTABILITY Our patent-pending design mounts to any 7/8" handlebar and is adjustable for any sized levers. The unique 30 degree down angle helps to keep the guards from interfering with the riders hands while on the track. DURABILITY Each mount is machined from tough 6061-T6 aluminum with a durable anodized finish. The guards are made from a special plastic that is tough enough to withstand an impact but pliable enough not to splinter in a crash. Replacement plastic guards are available individually. Note: Do not attach this guard to your handle bar slider - it must be mounted on your handlebar itself! If you do not have enough room on the existing bar we sell longer bars or if you have a Woodcraft bar be sell bar end sliders made to accept these guards.

Key Switch Elimination Harness for Motorcycle Road Racing - from Woodcraft Technologies!

Eliminate your Key Switch cleanly and easily.

- Installs in seconds - no cutting!

- Save weight & create space

- Plugs right into OEM connectors 

- Easy conversion back to street 

   $54.99 - $64.99

Check our Website
For more racing products

• 43-0740  Aprilia RSV4 '08-15
• 43-0810 Buell EBR 1190RX
• 43-0640  Ducati 848,1098,1198

• 43-0300 Honda CBR600RR 2007-'15
• 43-0301 Honda CBR1000RR 2004-'07
• 43-0302 Honda CBR600F4i '01-06

• 43-0100  Kawasaki ZX636R '13-15, Z1000 '10-15, ZX14R '12-'15             
• 43-0101  Kawasaki ZX14R '06-'11
• 43-0102  Kawasaki ZX6R '05-'12, ZX10R '04-'10, Ninja 650R '06-'08
• 43-0103  Kawasaki ZX10R '11-'15
• 43-0104  Kawasaki Ninja 250 '08-'12, Ninja 300 '13-'15
   
• 43-0200  Suzuki GSXR 600/750 '06-15, GSXR1000 '05-15
• 43-0201  Suzuki GSXR600 '97-03, GSXR750 '96-03, GSXR1000 '01-02,                                          GSXR1300 Hayabusa '99-07, SV650 '99-02
• 43-0202  Suzuki GSXR1000 '03-04, SV650/S '03-04, SV1000/S '03-04
• 43-0203  Suzuki GSXR600/750-K4 Models 2004
• 43-0204  Suzuki GSXR600/750-K5 Models 2005, GSXR1300 Hayabusa '08-14
• 43-0205  Suzuki SV650/S '05-08, SV1000/S '05-07

• 43-0500  Triumph 675 2006-'08
• 43-0501  Triumph 675 2009-'14

• 43-0400  Yamaha R1 '02-06, R6 '03-15, R6S '06-09
• 43-0401  Yamaha R1 '07-'08
• 43-0402  Yamaha R1 '09-'14
• 43-0403  Yamaha R1 2015
• 43-0404  Yamaha R3 2015
  
  Click on the part numbers to be brought to a product ordering page

1-2-3 Installation

Unplug and remove your OEM key switch
Unplug OEM RH bar switch
Plug in your Key Switch Elimination Harness
Your OEM RH bar switch now turns your ignition on and off!

2014-2015 Yamaha FZ07 Rearset Kit - 05-0407B

2014-2015 Yamaha FZ07  Rearset Kit - 05-0407B The foot controls are one of the most vital connections you have with your motorcycle. This kit is tailored specifically for the FZ07 to optimize your footpeg position for both the track and the street with 12 available peg locations.

http://www.rscycles.com/product_p/wc_05-0407b.htm This bike had pegs that were far too forward to allow a track rider to move on the motorcycle, and low enough that even new riders were dragging them.  The high position moves the pegs up 1.25" to 1.75" and back 1.625" to 2.125". In the low position, the pegs gave better control and still had plenty of legroom. The low position moves the pegs up .75" to 1.25" and back 1.375" to 1.875".

The full rearset kit consists of the rearset plates, ecentric footpegs, three-piece CFM pedals and all of the needed hardware to install the kit properly, plus a complete shift pedal with an adjustable toe peg. These kits assume that you currently have the OEM rearsets on your bike as it will utilize some of the OEM hardware. They are made from tough, aircraft grade 6061 T6 Aluminum and anodized with a silver finish. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. This kit can be used in either standard or GP shift position.

05-0407B Yamaha FZ07 2015 Complete Std or GP Shift, Adjustable Rear Set Kit W/Pedals, Silver All components of this rearset can be purchased individually under the "Spare Parts" tab. Pieces for the shift and brake pedal assemblies can be purchased under their own designated "Spare Parts" tab. For Installation Instructions CLICK HERE

2014-2015 Yamaha FZ09 Clip-on Adapter Plate

Woodcrafts New FZ09 adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. You now have the option to flip your adapter plate upside down, which results in a more aggressive riding position that improves both traction and feel. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort. Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash. Both the 1 inch and 1.5 inch riser setups can be run in either the "up" or "down" position. Retail Price: $259.99 Part number        Description 12-1409              Clipon Riser Set 1" Rise Adapter Plate 12-2409              Clipon Riser Set 1 1/2" Rise Adapter Plate 12-3409              Clipon Riser Set 2" Rise Adapter Plate The drop from the OEM bar height (measured from the end of the bar) is as follows Rise Guide 1 inch rise, up position - 2.75 inch drop over OEM 1 inch rise, down position - 3.75 inch drop over OEM Our exclusive design will set your bike apart at the race track or your local bike night. This kit comes standard with black handlebars Check out our Installation Instructions for more information. CLICK HERE  The Woodcraft riser plate system gives your bike a custom look while making the handlebar placement adjustable with the use of our various riser heights. Handlebar tubes which are kept as separate pieces allow for inexpensive replacement in the event of a crash.

NEW! 2015 Yamaha R3 Rear Set Kit

NEW! 2015 Yamaha R3 Rear Set Kit Woodcraft Technologies now has rearsets available for Yamaha's new 1/3 liter machine!

The full rearset kit consists of the mounting plates, footpegs, brake and shift pedals with eccentric toe pegs and all of the needed hardware to install the kit properly, assuming that you have the OEM rearsets on the machine. (See our link to the Installation instructions below). These kits are made from tough, aircraft grade 6061 T6 Aluminum and anodized with a black finish. This kit has eccentric pegs that have 12 positions of adjustment. The eccentric toe pieces give also you 1/2" of adjustability in all directions to help you fine tune your lever position. We tested these kits to get them in the perfect place for both the street or the track. The range of adjustment 1" to 2" above and 3/4" to 1 1/2" back from the OEM position. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. This kit can be used in either standard or GP shift position with a shift rod change (2 SKUs to choose from).

This kit can be used in either standard or GP shift position with a change in shift rod length. 05-0403B Yamaha R3 2015 Rearset  Assembly - Standard Shift 05-0404B Yamaha R3 2015 Rearset  Assembly - GP Shift

All spare parts for this rearset can be found under the "Spare Parts" tab. Parts for the brake and shift lever assemblies can be found under their own designated "Spare Parts" tab. Installation Instructions IN05-0403.pdf