Friday, July 31, 2015

Key Switch Elimination Harness for Motorcycle Road Racing - from Woodcraft Technologies!

Eliminate your Key Switch cleanly and easily.

- Installs in seconds - no cutting!
- Save weight & create space
- Plugs right into OEM connectors 
- Easy conversion back to street 

   $54.99 - $64.99


Check our Website
For more racing products





  • 43-0740  Aprilia RSV4 '08-15
  • 43-0810 Buell EBR 1190RX
  • 43-0640  Ducati 848,1098,1198
  • 43-0100  Kawasaki ZX636R '13-15, Z1000 '10-15, ZX14R '12-'15             
  • 43-0101  Kawasaki ZX14R '06-'11
  • 43-0102  Kawasaki ZX6R '05-'12, ZX10R '04-'10, Ninja 650R '06-'08
  • 43-0103  Kawasaki ZX10R '11-'15
  • 43-0104  Kawasaki Ninja 250 '08-'12, Ninja 300 '13-'15
     
  • 43-0200  Suzuki GSXR 600/750 '06-15, GSXR1000 '05-15
  • 43-0201  Suzuki GSXR600 '97-03, GSXR750 '96-03, GSXR1000 '01-02,                                          GSXR1300 Hayabusa '99-07, SV650 '99-02
  • 43-0202  Suzuki GSXR1000 '03-04, SV650/S '03-04, SV1000/S '03-04
  • 43-0203  Suzuki GSXR600/750-K4 Models 2004
  • 43-0204  Suzuki GSXR600/750-K5 Models 2005, GSXR1300 Hayabusa '08-14
  • 43-0205  Suzuki SV650/S '05-08, SV1000/S '05-07
  • 43-0400  Yamaha R1 '02-06, R6 '03-15, R6S '06-09
  • 43-0401  Yamaha R1 '07-'08
  • 43-0402  Yamaha R1 '09-'14
  • 43-0403  Yamaha R1 2015
  • 43-0404  Yamaha R3 2015

    Click on the part numbers to be brought to a product ordering page

1-2-3 Installation

Unplug and remove your OEM key switch
Unplug OEM RH bar switch
Plug in your Key Switch Elimination Harness
Your OEM RH bar switch now turns your ignition on and off!


Tuesday, July 21, 2015

2014-2015 Yamaha FZ07 Rearset Kit - 05-0407B

2014-2015 Yamaha FZ07 
Rearset Kit - 05-0407B
The foot controls are one of the most vital connections you have with your motorcycle. This kit is tailored specifically for the FZ07 to optimize your footpeg position for both the track and the street with 12 available peg locations. 
http://www.rscycles.com/product_p/wc_05-0407b.htm
This bike had pegs that were far too forward to allow a track rider to move on the motorcycle, and low enough that even new riders were dragging them.  The high position moves the pegs up 1.25" to 1.75" and back 1.625" to 2.125".

In the low position, the pegs gave better control and still had plenty of legroom. 
The low position moves the pegs up .75" to 1.25" and back 1.375" to 1.875". 
The full rearset kit consists of the rearset plates, ecentric footpegs, three-piece CFM pedals and all of the needed hardware to install the kit properly, plus a complete shift pedal with an adjustable toe peg. These kits assume that you currently have the OEM rearsets on your bike as it will utilize some of the OEM hardware. They are made from tough, aircraft grade 6061 T6 Aluminum and anodized with a silver finish. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. This kit can be used in either standard or GP shift position.
05-0407B Yamaha FZ07 2015 Complete Std or GP Shift, Adjustable Rear Set Kit W/Pedals, Silver

All components of this rearset can be purchased individually under the "Spare Parts" tab. Pieces for the shift and brake pedal assemblies can be purchased under their own designated "Spare Parts" tab.

For Installation Instructions CLICK HERE

Sunday, July 19, 2015

2014-2015 Yamaha FZ09 Clip-on Adapter Plate

Woodcrafts New FZ09 adapter plate bolts directly to the stock handlebar mount keeping
all of the stock clearances, while putting your hands in a more natural position.
You now have the option to flip your adapter plate upside down, which results in a more aggressive riding position that improves both traction and feel. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.
Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash. Both the 1 inch and 1.5 inch riser setups can be run in either the "up" or "down" position.
Retail Price: $259.99
Part number        Description
12-1409              Clipon Riser Set 1" Rise Adapter Plate
12-2409              Clipon Riser Set 1 1/2" Rise Adapter Plate
12-3409              Clipon Riser Set 2" Rise Adapter Plate

The drop from the OEM bar height (measured from the end of the bar) is as follows
Rise Guide
1 inch rise, up position - 2.75 inch drop over OEM
1 inch rise, down position - 3.75 inch drop over OEM
Our exclusive design will set your bike apart at the race track or your local bike night. This kit comes standard with black handlebars

Check out our Installation Instructions for more information. CLICK HERE 

The Woodcraft riser plate system gives your bike a custom look while making the handlebar placement adjustable with the use of our various riser heights. Handlebar tubes which are kept as separate pieces allow for inexpensive replacement in the event of a crash.

Wednesday, July 15, 2015

NEW! 2015 Yamaha R3 Rear Set Kit

NEW! 2015 Yamaha R3 Rear Set Kit
Woodcraft Technologies now has rearsets available
for Yamaha's new 1/3 liter machine!
Yamaha R1 2015 Rear Set Kit
The full rearset kit consists of the mounting plates, footpegs, brake and shift pedals with eccentric toe pegs and all of the needed hardware to install the kit properly, assuming that you have the OEM rearsets on the machine. (See our link to the Installation instructions below). These kits are made from tough, aircraft grade 6061 T6 Aluminum and anodized with a black finish. This kit has eccentric pegs that have 12 positions of adjustment. The eccentric toe pieces give also you 1/2" of adjustability in all directions to help you fine tune your lever position.

We tested these kits to get them in the perfect place for both the street or the track. The range of adjustment 1" to 2" above and 3/4" to 1 1/2" back from the OEM position. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. This kit can be used in either standard or GP shift position with a shift rod change (2 SKUs to choose from).
This kit can be used in either standard or GP shift position with a change in shift rod length.

05-0403B Yamaha R3 2015 Rearset  Assembly - Standard Shift

05-0404B Yamaha R3 2015 Rearset  Assembly - GP Shift
All spare parts for this rearset can be found under the "Spare Parts" tab. Parts for the brake and shift lever assemblies can be found under their own designated "Spare Parts" tab.
Installation Instructions IN05-0403.pdf 

Friday, July 10, 2015

Woodcraft Stay Dry Riding Undergarments

The BEST under suit garments we've ever tried!  These top of the line Woodcraft Stay Dry shirts and pants wick moisture away from your skin to keep you dry and cooler in the summer, warmer in the spring and fall. In addition, the inner suit allows your race suit to slide over your body and improve your ability to move on the bike and it also makes the getting out of your suit a snap!  See what others had to say below.


"Stay Dry" Riding Shirt and Pants (Sold Separately)
The ultimate shirt for under your leathers. Made for Woodcraft exclusively by Helly Hansen®, a world leader in light weight athletic gear. No other base layer transports sweat away from the skin better, keeping you dry and comfortable!
HH® Dry is a light weight base layer, ideal for high intensity activities.
These undergarments are Made from Helly Hanson's 100% Lifa® fabric, creating a dry layer next to the skin that keeps you comfortable during highly aerobic activities in a wide range of conditions.

Testimonial:  "I tried this suit in 45 deg. weather in April and 90 deg. weather in June.  The Woodcraft Stay Dry product kept me dry and comfortable in all conditions.....by far the best under suit shirt I've ever tried." - S.M.
THE ORIGINAL TECHNICAL BASE LAYER DESIGNED TO PERFORM IN ANY ACTIVITY, YEAR ROUND.

Woodcraft Stay Dry Riding Shirt by Helly Hansen®    SKU:   99-0400
Woodcraft Stay Dry Riding Pant by Helly Hansen®    SKU:   99-0500