Cheap Crash Damage Insurance to Protect your Sport-bike Asset!

Even if you never have or no longer race and do track days, but are still riding a sport bike on the street, you should consider these products to protect your asset. Frame sliders, case protection, axle sliders and handlebar sliders.

QUICK LINKS

Find us on Facebook Rising Sun Cycles LLC located at PO BOX 13, Brookeville, MD 20833. Rising Sun Cycles LLC can be reached online or stop by our trailer at many of the races up and down the East Coast. Rising Sun Cycles LLC, your one stop for all of your powersports needs. Email: sales@rscycles.com - Phone: 703-973-0125

2014-2015 Ducati Monster 821/1200S Clip-On Adapter Plate

      CLICK HERE For Woodcraft Products

SKU 12-1630 (1" Risers), 12-2630 (1.5" Risers)

Our new Monster 821/1200S adapter plate assembly comes complete with black handlebars and bolts directly to the stock handlebar mount.  These billet pieces look fantastic and have many advantages over stock bars: Lower your bars 1 to 3 inches. Put your hands in a more natural position for sport riding. Custom tailor the bar height for optimum comfort using different risers or "flipping" the adapter over. Inexpensive replacement bars are available anywhere - don't let a tip over ruin a track day! The 1 inch and 1.5 and riser setups can be run in either the "up" or "down" position. Rise Guide 1" rise, up position - 2.25" drop  1" rise, down position - 3.25" drop 1.5" rise, up position - 1.75" drop  1.5" rise, down position - 3.75" drop We've had several riders use the adapter plate in the "up" position on the street and in the "down" position for a track day. All the hardware included in the kit

Part # 12-1630             1" risers (in UP position)

      CLICK HERE For our Woodcraft Products collection

QUICK LINKS

Find us on Facebook Rising Sun Cycles LLC located at PO BOX 13, Brookeville, MD 20833. Rising Sun Cycles LLC can be reached online or stop by our trailer at many of the races up and down the East Coast. Rising Sun Cycles LLC, your one stop for all of your powersports needs. Email: sales@rscycles.com - Phone: 703-973-0125

Servo Buddy and Key Switch Elimination Harnesses

If you are building a bike with an aftermarket exhaust or maybe for track use only, then you should see these products Woodcraft Technologies released earlier this season.

ELIMINATE FACTORY SERVO MOTOR Completely eliminating the motor, valve, cables, etc. not only drops weight and frees up valuable space, but utilizing the Servo Buddy improves reliability by eliminating the common issue of the factory servo motor gears stripping out, or the motor burning up. A MUST HAVE FOR AFTERMARKET EXHAUST Servo Buddy utilizes OEM wire harness connectors providing a secure connection with no wire cutting. Most motorcycles will throw an FI code when the stock exhaust is removed. Servo Buddy cures this issue. This allows the rider to see if there is an actual problem when the FI light comes on, not due to an exhaust valve code. CLICK HERE for a complete listing of all our applications

*FOR RACING USE ONLY** FOR USA MODELS ONLY* Exclusively available from Woodcraft. Our Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up valuable space for steering dampers and lap timers. The things you need go in the space you save. There is no longer a need for keys. The best thing about our Key Switch Eliminator is the ability to simply "Plug and Play". It installs in seconds and requires no modifications to your stock harness - no need to cut any wires! This means easy re - installation of stock components down the road. CLICK HERE for a complete listing of all our applications

BMW S1000RR 2015 Rear Set Kit

BMW S1000RR 2015 Std/GP Adjustable Rearset Kit Complete W/Pedals Order yours today!

BMW S1000RR 2015 Std/GP Adjustable Rearset Kit Complete W/Pedals  SKU 05-0755B

We are proud to announce our rearsets for the incredible new 2015 S1000RR. This kit features 12 footpeg positions for a custom fit that can be tailored for any condition or rider preference.  Riders can move anywhere from 0 to 25mm up and 0 to 20mm back.  Both our standard and GP shift setup utilize the stock shift BMW rod and quick shifter. The complete rearset kit consists of the rearset plates, footpegs, 3 piece billet pedals, heel guards. This kit assumes that you have OEM rearsets on the bike as some factory hardware may be reused. Our rearsets are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. All spare parts for this assembly can be found under the "Spare Parts" tab. Parts for the brake and shift pedal assemblies can be found under their own designated "Spare Parts" tab. For installation instructions click this link IN05-0755.pdf 05-0755B  BMW S1000RR 2015 Std/GP Adjustable Rearset Kit Complete W/Pedals

Brake lever Protection and Hand guard Woodcraft

Brake lever Protection and Hand guard The Woodcraft brake lever guard is designed to keep another rider from accidentally hitting your front brake during close racing. The adjustable guard is made from tough plastic and bolted to a CNC-machined aluminum base. The guards are available individually or in sets (left+right).

Just about everyone we talked to knows someone who has crashed due to their brake lever coming into contact with another rider. Our hand guard line not only prevents inadvertent lever contact but also helps to protect your hands during a crash by keeping them out of harms way. We have a few friends whose pinky fingers have been "shortened" in a crash.

MSRP $109.99 - $179.99 Available in sets of left and right or individually in all these colors. To place your order CLICK HERE A video describing these Products

ADJUSTABILITY Our patent-pending design mounts to any 7/8" handlebar and is adjustable for any sized levers. The unique 30 degree down angle helps to keep the guards from interfering with the riders hands while on the track. DURABILITY Each mount is machined from tough 6061-T6 aluminum with a durable anodized finish. The guards are made from a special plastic that is tough enough to withstand an impact but pliable enough not to splinter in a crash. Replacement plastic guards are available individually. Note: Do not attach this guard to your handle bar slider - it must be mounted on your handlebar itself! If you do not have enough room on the existing bar we sell longer bars or if you have a Woodcraft bar be sell bar end sliders made to accept these guards.

Key Switch Elimination Harness for Motorcycle Road Racing - from Woodcraft Technologies!

Eliminate your Key Switch cleanly and easily.

- Installs in seconds - no cutting!

- Save weight & create space

- Plugs right into OEM connectors 

- Easy conversion back to street 

   $54.99 - $64.99

Check our Website
For more racing products

• 43-0740  Aprilia RSV4 '08-15
• 43-0810 Buell EBR 1190RX
• 43-0640  Ducati 848,1098,1198

• 43-0300 Honda CBR600RR 2007-'15
• 43-0301 Honda CBR1000RR 2004-'07
• 43-0302 Honda CBR600F4i '01-06

• 43-0100  Kawasaki ZX636R '13-15, Z1000 '10-15, ZX14R '12-'15             
• 43-0101  Kawasaki ZX14R '06-'11
• 43-0102  Kawasaki ZX6R '05-'12, ZX10R '04-'10, Ninja 650R '06-'08
• 43-0103  Kawasaki ZX10R '11-'15
• 43-0104  Kawasaki Ninja 250 '08-'12, Ninja 300 '13-'15
   
• 43-0200  Suzuki GSXR 600/750 '06-15, GSXR1000 '05-15
• 43-0201  Suzuki GSXR600 '97-03, GSXR750 '96-03, GSXR1000 '01-02,                                          GSXR1300 Hayabusa '99-07, SV650 '99-02
• 43-0202  Suzuki GSXR1000 '03-04, SV650/S '03-04, SV1000/S '03-04
• 43-0203  Suzuki GSXR600/750-K4 Models 2004
• 43-0204  Suzuki GSXR600/750-K5 Models 2005, GSXR1300 Hayabusa '08-14
• 43-0205  Suzuki SV650/S '05-08, SV1000/S '05-07

• 43-0500  Triumph 675 2006-'08
• 43-0501  Triumph 675 2009-'14

• 43-0400  Yamaha R1 '02-06, R6 '03-15, R6S '06-09
• 43-0401  Yamaha R1 '07-'08
• 43-0402  Yamaha R1 '09-'14
• 43-0403  Yamaha R1 2015
• 43-0404  Yamaha R3 2015
  
  Click on the part numbers to be brought to a product ordering page

1-2-3 Installation

Unplug and remove your OEM key switch
Unplug OEM RH bar switch
Plug in your Key Switch Elimination Harness
Your OEM RH bar switch now turns your ignition on and off!

2014-2015 Yamaha FZ07 Rearset Kit - 05-0407B

2014-2015 Yamaha FZ07  Rearset Kit - 05-0407B The foot controls are one of the most vital connections you have with your motorcycle. This kit is tailored specifically for the FZ07 to optimize your footpeg position for both the track and the street with 12 available peg locations.

http://www.rscycles.com/product_p/wc_05-0407b.htm This bike had pegs that were far too forward to allow a track rider to move on the motorcycle, and low enough that even new riders were dragging them.  The high position moves the pegs up 1.25" to 1.75" and back 1.625" to 2.125". In the low position, the pegs gave better control and still had plenty of legroom. The low position moves the pegs up .75" to 1.25" and back 1.375" to 1.875".

The full rearset kit consists of the rearset plates, ecentric footpegs, three-piece CFM pedals and all of the needed hardware to install the kit properly, plus a complete shift pedal with an adjustable toe peg. These kits assume that you currently have the OEM rearsets on your bike as it will utilize some of the OEM hardware. They are made from tough, aircraft grade 6061 T6 Aluminum and anodized with a silver finish. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. This kit can be used in either standard or GP shift position.

05-0407B Yamaha FZ07 2015 Complete Std or GP Shift, Adjustable Rear Set Kit W/Pedals, Silver All components of this rearset can be purchased individually under the "Spare Parts" tab. Pieces for the shift and brake pedal assemblies can be purchased under their own designated "Spare Parts" tab. For Installation Instructions CLICK HERE

2014-2015 Yamaha FZ09 Clip-on Adapter Plate

Woodcrafts New FZ09 adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. You now have the option to flip your adapter plate upside down, which results in a more aggressive riding position that improves both traction and feel. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort. Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash. Both the 1 inch and 1.5 inch riser setups can be run in either the "up" or "down" position. Retail Price: $259.99 Part number        Description 12-1409              Clipon Riser Set 1" Rise Adapter Plate 12-2409              Clipon Riser Set 1 1/2" Rise Adapter Plate 12-3409              Clipon Riser Set 2" Rise Adapter Plate The drop from the OEM bar height (measured from the end of the bar) is as follows Rise Guide 1 inch rise, up position - 2.75 inch drop over OEM 1 inch rise, down position - 3.75 inch drop over OEM Our exclusive design will set your bike apart at the race track or your local bike night. This kit comes standard with black handlebars Check out our Installation Instructions for more information. CLICK HERE  The Woodcraft riser plate system gives your bike a custom look while making the handlebar placement adjustable with the use of our various riser heights. Handlebar tubes which are kept as separate pieces allow for inexpensive replacement in the event of a crash.

NEW! 2015 Yamaha R3 Rear Set Kit

NEW! 2015 Yamaha R3 Rear Set Kit Woodcraft Technologies now has rearsets available for Yamaha's new 1/3 liter machine!

The full rearset kit consists of the mounting plates, footpegs, brake and shift pedals with eccentric toe pegs and all of the needed hardware to install the kit properly, assuming that you have the OEM rearsets on the machine. (See our link to the Installation instructions below). These kits are made from tough, aircraft grade 6061 T6 Aluminum and anodized with a black finish. This kit has eccentric pegs that have 12 positions of adjustment. The eccentric toe pieces give also you 1/2" of adjustability in all directions to help you fine tune your lever position. We tested these kits to get them in the perfect place for both the street or the track. The range of adjustment 1" to 2" above and 3/4" to 1 1/2" back from the OEM position. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. This kit can be used in either standard or GP shift position with a shift rod change (2 SKUs to choose from).

This kit can be used in either standard or GP shift position with a change in shift rod length. 05-0403B Yamaha R3 2015 Rearset  Assembly - Standard Shift 05-0404B Yamaha R3 2015 Rearset  Assembly - GP Shift

All spare parts for this rearset can be found under the "Spare Parts" tab. Parts for the brake and shift lever assemblies can be found under their own designated "Spare Parts" tab. Installation Instructions IN05-0403.pdf

Woodcraft Stay Dry Riding Undergarments

The BEST under suit garments we've ever tried!  These top of the line Woodcraft Stay Dry shirts and pants wick moisture away from your skin to keep you dry and cooler in the summer, warmer in the spring and fall. In addition, the inner suit allows your race suit to slide over your body and improve your ability to move on the bike and it also makes the getting out of your suit a snap!  See what others had to say below. CLICK HERE - The Ultimate motorcycling Product Review

"Stay Dry" Riding Shirt and Pants (Sold Separately) The ultimate shirt for under your leathers. Made for Woodcraft exclusively by Helly Hansen®, a world leader in light weight athletic gear. No other base layer transports sweat away from the skin better, keeping you dry and comfortable! HH® Dry is a light weight base layer, ideal for high intensity activities.

These undergarments are Made from Helly Hanson's 100% Lifa® fabric, creating a dry layer next to the skin that keeps you comfortable during highly aerobic activities in a wide range of conditions. Testimonial:  "I tried this suit in 45 deg. weather in April and 90 deg. weather in June.  The Woodcraft Stay Dry product kept me dry and comfortable in all conditions.....by far the best under suit shirt I've ever tried." - S.M.

THE ORIGINAL TECHNICAL BASE LAYER DESIGNED TO PERFORM IN ANY ACTIVITY, YEAR ROUND. Woodcraft Stay Dry Riding Shirt by Helly Hansen®    SKU:   99-0400 Woodcraft Stay Dry Riding Pant by Helly Hansen®    SKU:   99-0500

2014-2015 Yamaha FZ09 Rearset Kit - 05-0409B

If you your like FZ09, you will love it with the addition of Woodcraft rearsets.

The FZ09 is a great motorcycle, but anyone who has ridden one hard knows that the pegs drag on the ground very quickly.  Woodcraft's new FZ09 rearsets offer a wide range of adjustment while still maintaining the toughness and durability that the Woodcraft brand is built upon.  This kit will work on a stock motorcycle as well as with all of the popular aftermarket pipes that we have tried.  Get the ground clearance, protection and good looks your FZ09 is asking for! Part Number 05-0409B  $499.99 For more information or to place an order CLICK HERE

This kit utilizes some of your OEM rearsets parts and assumes these parts are available. Please see our installation intructions for more explanation. CLICK HERE The full rearset kit consists of the rearset plates, footpegs and all of the needed hardware to install the kit properly, plus a complete shift pedal with an adjustable toe peg. These kits assume that you currently have the OEM rearsets on your bike. They are made from tough, aircraft grade 6061 T6 Aluminum and anodized with a black finish. This kit has eccentric pegs that have 12 positions of adjustment ranging from 1/4" lower than stock to over an inch higher than stock. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. This kit can be used in either standard or GP shift position and is designed to work perfectly with the OEM quickshifter.